DIN Standards Committee Aerospace
DIN EN 3660-065
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 065: Cable outlet, style K, 90°, for heat shrinkable boot, shielded, sealed, self locking - Product standard; German and English version EN 3660-065:2016
Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 065: Endgehäuse, Bauform K, 90°, für wärmeschrumpfende Bauteile, Schirmanschluss, abgedichtet, selbstsichernd - Produktnorm; Deutsche und Englische Fassung EN 3660-065:2016
Overview
The DIN EN 3660 series of standards describes the characteristics of cable outlet accessories for circular and rectangular electrical and optical connectors for aerospace applications. The new edition of Part 065 defines a range of cable outlets, style K, 90°, shielded, sealed, self-locking (anti-rotational) for heat shrinkable boot, and or with metallic bands under the following conditions: Associated electrical connector(s): EN 3660-002. Class N in EN 3660-001 corresponds to class F in EN 3660-065. Temperature ranges: Class F (N): -65 °C to 200 °C (see note above); Class K: -65 °C to 200 °C; Class KE: -65 °C to 260 °C; Class W: -65 °C to 175 °C; Class T: -65 °C to 175 °C (Nickel PTFE plating); Class Z: -65 °C to 175 °C (Zinc Nickel plating). Associated electrical accessories: EN 3660-033 Metallic band (for shield termination). These cable outlets are designed for termination of overall shielding braid and / or individual cable shields. They accommodate/permit the termination of heat shrinkable boots. This standard differs from the previous edition DIN EN 3660-065:2010-10 as follows: a) the scope has been extended to metallic bands and temperature range classes KE, T and Z; b) the normative references have been updated and extended; c) Figure 1 has been revised and the legend extended; d) Table 1 has been extended to include shell size 28, the columns for D and N have been omitted, specifications have been partially changed; e) Table 2 has been extended to include classes KE, T and Z, revised and the mass specifications have been partially changed and supplemented; f) limit dimensions have been included for diameter A and distance D in Table 3; g) Figures 3 and 4 as well as Table 4 have been revised and partially changed, optional connection dimensions have been newly included for classes K and KE with Figures 5 and 6 as well as Table 5; h) classes KE, T and Z have been newly included in 4. 5; i) in Table 6 (formerly Table 5), classes KE, T and Z and shell size 28 have been added and assembly torques have been changed; j) for the tests in 5.1, the newly added classes KE, T and Z have been taken into account, tests according to EN 2591-214, EN 2591-313 and EN 2591-423 and for the remaining tests, additions have been partly included and/or changes have been made; k) 5.2, Special tests, has been changed; l) the identification block in Clause 6 has been extended to include information on decoupling protection. The standards of the EN 3660 series are prepared by ASD-STAN, Department of Electrical Engineering, with the collaboration of German experts from the Aerospace Standards Committee (NL) at DIN. AeroSpace and Defence Industries Association of Europe - Standardization (ASD-STAN) has been declared responsible by the European Committee for Standardization (CEN) for preparing European Standards (EN) for the aerospace sector. By agreement of 3 October 1986, ASD became the Associated Organization (ASB) of CEN. The responsible German standardization committee is Working Committee NA 131-04-03 AA "Elektrische Verbindungselemente" ("Electrical connectors") at DIN Standards Committee Aerospace (NL).
Document: references other documents
Responsible national committee
NA 131-04-03 AA - Electrical Connectors
