DIN Standards Committee Timber and Furniture
Wood-based panels - Characteristic values for structural design - Part 2: Plywood
Abstract
This document provides information on the characteristic values for use in designing structures incorporating wood-based panels. The characteristic values given are as defined in EN 1995 1-1. When utilizing the classification system for derivation of plywood characteristic values, this document can only be applied with reference to EN 636. This document includes the characteristic values of the mechanical properties for plywood complying with EN 636 in bending, tension, compression, panel shear and planar shear. EN 636 classifies bending properties into two sets of classes, one for stiffness and another for strength. Stiffness and strength in tension and compression are related to the same properties in bending. For shear properties, fixed values determined by correlation to density are provided. Where optimized values are needed, the characteristic values are determined directly by testing in accordance with EN 789 and EN 1058 or by combination of testing according to the latter two standards and calculation according to EN 14272. This document applies to panels complying with the three following conditions: - 5 layers or more and 6 mm overall thickness and more; - the ratio of the cumulative thickness of veneers in alternate directions does not exceed 2,5; - wood species with a mean density greater than 350 kg/m3 and not exceeding 750 kg/m3.
Begin
2023-12-21
WI
00112229
Planned document number
prEN 12369-2
Responsible national committee
NA 042-02-15 AA - Wood-based panels - Mirror committee for CEN/TC 112 and ISO/TC 89
Responsible european committee
CEN/TC 112/WG 4 - Test methods
draft standard
Wood-based panels - Characteristic values for structural design - Part 2: Plywood
2024-05
Order from DIN Media
previous edition(s)
Wood-based panels - Characteristic values for structural design - Part 2: Plywood
2011-06
