DIN Standards Committee Rolling Bearings and Plain Bearings
Rolling bearings - Method for calculating the effective static safety factor for universally loaded rolling bearings
Abstract
This document specifies the calculation of the effective static safety under consideration of tilt or misalignment, operating clearance of the bearing, and internal load distribution on rolling elements. The calculation method provided in this document covers influencing parameters in addition to those described in ISO 76. The directions and limitations given in ISO 76 and ISO 20056-2 apply to this document. The calculation method pertains to the static safety of the bearings. Other mechanisms of failure, like false brinelling, fatigue life, wear or microspalling (gray-staining), lie outside the scope of this document. This document applies to single- and multi-row radial and thrust ball bearings, subjected to radial and axial load and with radial clearance and tilt taken into account. It also applies to single- and multi-row radial and thrust roller bearings, subjected to radial and axial load and with radial clearance and tilt taken into account. References to methods for the analysis of the internal load distribution under general load are given. The analysis of effective static safety factor for multi-row bearings or bearings of a more complex geometry can be derived from the formulae given in this document. For these bearings, the load distribution for each individual row has to be considered. The calculation of effective static safety factor is also applicable to hybrid bearings, using the static load ratings per ISO 20056-2.
Begin
2024-04-26
Planned document number
DIN ISO 17956
Project number
11800596
Responsible national committee
NA 118-01-08 AA - Load ratings and rating life
