DIN Standards Committee Packaging
Packaging - Transport packaging for dangerous goods - Compatibility testing of polyethylene, fluorinated polyethylene and co-extruded plastic (ISO/DIS 17508:2024)
Abstract
This document specifies test methods for the determination of the plastics compatibility of packaging/intermediate bulk containers (IBC) made from polyethylene, fluorinated polyethylene and coextruded plastics. It covers the determination of adequate plastics compatibility against the processes of deterioration: - softening due to absorption (swelling); - stress cracking; and - combinations thereof. It applies to: - drums and containers made from plastics according to paragraph 6.1.4.8 of the UN recommendations 1); - composite packaging (plastics) with inner receptacle made from plastics according to paragraph 6.1.4.19 of the UN recommendations; - rigid plastics IBCs (types 31H1 and 31H2) according to 6.5.5.3 of the UN recommendations; and - composite IBCs with rigid plastics inner receptacles (type 31HZ1) according to 6.5.5.4 of the UN recommendations; whose design is approved by a competent authority for the transport of liquid dangerous goods. This proof of adequate plastics compatibility is only applicable to the above packaging and IBC types of the following materials and material specifications: - packaging and IBCs made from polyethylene (PE); - packaging and IBCs made from polyethylene (PE), whose internal surfaces are fluorinated; and - packaging and IBCs which are coextrusion blow moulded and have walls with the following multilayer structure (from inside to outside): - polyamide (PA)//bonding agents//polyethylene (PE); or - ethyl vinyl alcohol (EVOH)//bonding agents//polyethylene (PE). 1) UN Recommendations on the Transport of Dangerous Goods - Model Regulations
Begin
2023-06-21
WI
00261505
Planned document number
prEN ISO 17508
Responsible national committee
NA 115-01-06 AA - Packaging of dangerous goods
