DIN Standards Committee Technical Fundamentals
PN 16 cocks with adjusting nut and male connection and test connection for pressure gauges
Abstract
This document is applicable to cocks for pressure gauges for use in pressure measuring setups for liquids, gases and vapours, which have a male connection on the process side and a female connection with adjusting nut as well as a test connection on the instrument side, for a maximum allowable pressure of 16 bar and an operating temperature range of -10 °C to +50 °C. Three design are specified:
- Form A: with male test connection G 1/2 B or M20×5;
- Form B: with round test flange 40×5;
- Form C: with narrow test flange 60×25. This document does not specify sealing washers; for these DIN EN 837-1 applies
.
- Form B: with round test flange 40×5;
Begin
2022-12-20
Planned document number
DIN 16263
Project number
15202856
Responsible national committee
NA 152-04-01 AA - Mechanical gauges for pressure and temperatur
draft standard
PN 16 cocks with adjusting nut and male connection and test connection for pressure gauges
2024-01
Order from DIN Media
previous edition(s)
PN 16 cocks with adjusting nut and male connection and test connection for pressure gauges
2004-07
