DIN Standards Committee Mechanical Engineering
Gas-loaded accumulators for fluid power applications
Abstract
(Scope of this project) For this proposed revision of EN 14359, a total of 6 CEN Consultant comments have been addressed by CEN/TC 54 WG5; changes proposed and changes to be made have been agreed by the working group. In addition, comments received as part of the recent Systematic Review of EN 14359 have also been reviewed and addressed. The Scope of EN 14359 remains unchanged: “This European Standard specifies the requirements for materials, design, manufacture, testing inspection, safety equipment configuration and documentation (including instructions for first operation), for commonly-used types of gas-loaded accumulators and pressure vessels used to provide additional gas capacity for fluid power applications.” (Full Scope of existing standard) 1.1 This European Standard specifies the requirements for materials, design, manufacture, testing inspection, safety equipment configuration and documentation (including instructions for first operation), for commonly-used types of gas-loaded accumulators and pressure vessels used to provide additional gas capacity for fluid power applications (see 1.2). 1.2 This European Standard applies to the following types of components, defined as the pressure-containing envelope of gas-loaded accumulators: - bladder type; - diaphragm type; - piston type; - transfer type; - pressure vessels used to provide additional gas capacity. They consist of one or several parts joined together by a variety of mechanical means and by welding. 1.3 This European Standard applies to gas-loaded accumulators which operate with the following conditions: - subject to an internal gauge pressure greater than 0,5 bar; - working temperature not lower than -50 °C and not higher than +200 °C; - containing all liquids and gases as defined in the Pressure Equipment Directive 2014/68/EU, see Note. NOTE When the accumulator contains Group 1 liquids or gases, consideration relating to risks other than those required by Pressure Equipment Directive 2014/68/EU are not covered by this European Standard and must be assessed separately.
Begin
2024-03-04
WI
00054211
Planned document number
DIN EN 14359 rev
Project number
06004491
Responsible national committee
NA 060-36-19 AA - Hydraulic accumulators
Responsible european committee
previous edition(s)
Gas-loaded accumulators for fluid power applications; German version EN 14359:2017
2017-09
