DIN Standards Committee Building and Civil Engineering
Glass in building - Determination of luminous and solar characteristics of glazing; German and English version prEN 410:2024
Abstract
This European Standard specifies methods of determining the luminous and solar characteristics of glazing in buildings. These characteristic can serve as a basis for lighting, heating and cooling calculations of rooms and permit comparison between different types of glazing. This European Standard applies both to conventional glazing and to absorbing or reflecting solar-control glazing, used as vertical or horizontal glazed apertures. The appropriate formulae for single, double and triple glazing are given. This European Standard is accordingly applicable to all transparent materials except those which show significant transmission in the wavelength region 5 µm to 50 µm of ambient temperature radiation, such as certain plastic materials. Materials with light-scattering properties for incident radiation are dealt with as conventional transparent materials subject to certain conditions (see 5.2). Angular light and solar properties of glass in building are excluded from this Standard. However, research work in this area is summarised in E.1, E.2 and E.3. While this European Standard presents the formulae for the exact calculations of the spectral characteristics of glazing, it does not consider the uncertainty of the measurements necessary to determine the spectral parameters that are used in the calculations. It should be noted that, for simple glazing systems where few measurements are required, the uncertainty of the results will be satisfactory if correct measurements procedures have been followed. When the glazing systems become complex and a large number of measurements are required to determine the spectral parameters, the uncertainty is cumulative with the number of measurements and should be considered in the final results. The term interface used in this European Standard, is considered to be a surface characterized by its transmission and reflections of light intensities.
Begin
2024-07-03
WI
00129279
Planned document number
DIN EN 410
Project number
00518602
Responsible national committee
Responsible european committee
CEN/TC 129 - Glass in building
draft standard
Glass in building - Determination of luminous and solar characteristics of glazing; German and English version prEN 410:2024
2024-12
Order from DIN Media